OWNER 爷 S MANUAL JAC High end Light Trucks The followings are very important for the correct management and economic use of JAC vehicles, and code is attached on the dashboard near the right column. they shall be read carefully before use and maintenance. Locations of chassis number and engine number Overload Please note down the chassis number and engine number, so as to give them to the specified JAC maintenance stations in case of repair and maintenance. Overloading will shorten vehicle's service life, but also bring about potential risk to safe driving. The loading mass must be limited to the specified range of the max.
total mass for vehicle, and the load distributions on the front and rear shafts shall not be more than the carrying capacity of the vehicle shafts. Please refer to the techni 鄄 Chassis number The chassis number, which is VIN code number, is stamped on the outer side cal specification sheet for the rated total mass value and shaft loading capacity. of the right longeron end of the frame. Engine number The engine cylinder head is affixed with the engine tag, on which it is marked with information about the engine, such as its model, serial number, nominal horse power, rated engine speed, ex-works date, etc.
Location of the vehicle nameplate The embossed number of VIN code for vehicle and Type II chassis is located on the outer side of the right longeron of the frame as well as, on the back side of the rear support of the rear leaf spring. Besides, an individual tablet of VIN 2 3