OWNER 爷 S MANUAL JAC High end Light Trucks Careful driving and maintenance during the run-in period will play a crucial role in improvement of the Vehicle operation and management performance and service life. So, the followings must be strictly abided by during the initial run-in peri 鄄 All the components and devices of the vehicles shall be checked according to od of 3000km: the requirements in sections of "Controllers and instruments" and "Driving"; 1. During the initial 3000km driving, the vehicle speed shall not be more than 70% of the max. engine speed. Attention should be paid to the tachometer dur 鄄 ing driving to avoid engine over speed running.
Maintenance For driving safety, vehicle reliability and good performance, the requirements in 2. Try to avoid engine over speed running, abrupt startup or unnecessary e 鄄 the section "Maintenance" should be followed in check and adjustment. mergency braking. Note 院 1. No refitting or unauthorized installation of any equipment is allowed on JAC vehicles. Our Company will not be responsible for any losses due to unautho 鄄 3. It is necessary to have the engine in idle running before driving each time, rized refitting or installation of any equipment! 2. If any problem occurs during the use of our products, make sure to have until it comes up to the normal working temperature.
them sent to the specified JAC service station for maintenance; please see clearly the genuine parts of JAC vehicles if any parts need to be changed. 3. Correct run-in of new vehicle has much to do with longer service life, reliability and economy. It is specified that new 6 7