1.3 Introduction Foreword 1.3.2 Directions of machine Front Bucket Right Left Rear GK032003 In this manual, the directions of the machine (front, rear, left, right) are determined according to the view from the operator's seat in the direction of travel (front) of the machine. 1.3.3 Visibility from operator's seat The visibility standards (ISO 5006) for this machine require a view shown in the diagram on the right side. 1 m Visibility in immediate area The visibility of this machine in the area 1 m from the outside surface of the machine at a height of 1.5 m is shown in the dia- gram on the right side.
The hatched area (A) shows the area where the view is blocked by part of the machine when mirrors or other aids to visibility are installed as standard. Please be fully aware that there are places that cannot be seen when operating the machine. 1 m GK038001 1-8 WA470-6H – VEAM946100