Foreword 1.3 Introduction 1.3 Introduction This loader is a machine with independent transmission, moving on chains or wheels. Driving in forward direction, the loader can load or dig material using its attachments intended for loading operations (i.e. bucket). This KOMATSU machine is designed to be used mainly for the following work: ! Digging work ! Smoothing ! Pushing work ! Loading work For details of the operating procedure, see "Work possible using wheel loader (3-130)". 1.3.1 Intended use If you use the machine for any other purpose than specified above, we will not accept any responsibility for safety.
All consid- erations concerning safety will then be up to the owner or the operating and maintenance personnel. In any case, neither you nor any other person are/is authorised to perform work and func- tions explicitly prohibited in these operating instructions. The transport of persons in the work equipment is strictly forbidden! For details of the operating procedure, see "Work possible using wheel loader (3-130)". WA470-6H – VEAM946100 1-7