Ch 2 page 205 TRANSMISSION Assemble both O-rings 35x2 (1) to the pressure pipe (2) and grease them. Figure 650 Install the pressure pipe (1) into the converter bellhousing until contact. Figure 651 Install the screw plugs M48x2 with O-ring 42x2.5. Tightening torque (M10/8.8x30) MA =145 Nm Figure 652 By means of the hexagon screws (3) fasten the flange shaft (1) to the converter (2). Tightening torque (M12/10.9x30) MA =120 Nm Figure 653 SHOP MANUAL