TRANSMISSION Ch 2 page 224 Reassembly of shifting block I and speed sensors: Shifting block I 1 = pressure controller with follow-on slide 2 = pressure reducing valve 3 = wiring harness ErgoControl II A = connection of wiring harness shifting block II B = connection of control unit (TCU) 3 1 B 2 A Figure 721 Insert the pressure reducing valve consisting of: plug (1) compression spring (2) piston (3) 3 into the valve block (4). 2 4 1 Figure 722 Fasten the pressure reducing valve with retaining ring 18x1 (1). 1 Figure 723 All follow-on slides consisting of: piston (1) compression spring (2) 3 to be inserted into the valve block (3). 1 2 Figure 724 SHOP MANUAL