TRANSMISSION Ch 2 page 226 Fasten the bolted connection duct plate/valve block. Tightening torque (M6/10.9x50) MA = 9.5 Nm (S) Socket wrench TX-27 MX504253 Figure 729 Insert the differential lock solenoid valve (1) with the bracket (2) into the valve block and fasten it with the cylindrical screws (3). Tightening torque (M6/8.8x12) MA = 9.5 Nm Pay attention to the installation position of the solenoid valve – plug-in connection (see arrow). Install all screw plugs M12x1.5 with O-ring 9.5x2 (4). Tightening torque MA = 12 Nm Figure 730 Insert the wiring harness (1) from the opposite side into the duct plate, fix it with the fixing bracket (2) and fasten it with the cylindrical screws (3).
Tightening torque (M6/8.8x12) MA = 9.5 Nm Close lockings of the plug connections wiring harness/pressure regulator/differential lock solenoid valve. Figure 731 Fasten the speed sensors (1 and 2) to the fixing plate (3) with the cylindrical screws (4). Tightening torque (M6/8.8x12) MA = 9.5 Nm Legend speed sensors: 1 = Speed sensor - n1 turbine 2 = Speed sensor - n2 primary step Figure 732 SHOP MANUAL