TRANSMISSION Ch 2 page 44 Separate axle insert LKV assy from transmission 1.Totate transmission in 90 ° 2.Loosen the hexagon screws. We recommend loosening of the bolted connection with a power wrench. (S) Power wrench . Figure 50 3. Remove the hexagon screws (1). 4. Loosen the screw plug and remove (2). Figure 51 5. Mount the eye bolt and by means of a lifting tackle separate the axle insert from the transmission. (S) Eye bolt 850317-00068 . Figure 52 6. Remove the O-ring (2) and the shaft seal (1). Figure 53 SHOP MANUAL