Ch 2 page 45 TRANSMISSION Removal inner components of Trasnsmission Removal of speed sensor n4-output 1. Loosen cap screws and remove the cover (1) with gasket. Figure 54 2. Separate plug connection (1). 3. Remove cable clip (2). 4. Pull out retaining plate (3). 5. Loosen cap screw and remove the speed sensor. Figure 55 Figure 56 Removing the oil level indicator 1. Loosen hexagon screws and remove cover plate (1) with seal. 2. Loosen hexagon screws and remove the oil level indicator (2). Figure 57 Removing the breather and cover plate 1. Loosen cap screws and cover plate (1) with gasket. 2. Loosen breather (2). 3. Loosen screw plug (3). Figure 58 SHOP MANUAL