TRANSMISSION Ch 2 page 76 Loosen the cylindrical screws (1) and remove the suction tube (2). Figure 169 Insert the pressure piece into the bore to support the rapid grip and pull off the bearing inner ring by means of the rapid grip. (S) Rapid grip 850317-00072 (S) Pressure piece 850317-00073 (S) Basic tool 850316-00110 (S) Reducer K9006785 Figure 170 Remove the bearing outer rings from housing I. Figure 171 Unsnap the retaining ring (1) and by means of a mandrel drive the ball bearing (2) out of housing I. NOTE These components are only installed for versionswithout axle insert LKV! Figure 172 SHOP MANUAL