TRANSMISSION Ch 2 page 78 Differential “G” Remove the screen sheet (1). Figure 177 By means of a lifting tackle pull the differential (1) out o the ball bearing seat in housing II and deposit it for furthe disassembly. Apply slight hits onto the output shaft. Figure 178 Opposite figure shows markings and arrangement of the clutches. Removal of the clutches with the mounting device is described in (Figure 179)-(Figure 185) In case of inadequate procedure there is a risk of injury! Figure 179 Axially fix Clutch “E“ with assembly aid (S1). (S1) Assembly aid 850317-00074 Mount the hook (S3) onto mounting device I (S2) and by means of a lifting tackle install it to the clutches until contact.
(S2) Mounting device I 850317-00075 (S3) Hook 850317-00076 All additionally required components belong to the scope of parts of the mounting device! Figure 180 SHOP MANUAL CAUTION