Correct wearing of seat belt Locking of seat belt Wearing the front seat belt Even if the vehicle speed is very low, in the event of a frontal collision, the force acting on the human body is also very large. The drivers and passengers cannot support their body with their hands. The drivers and passengers who do not wear the seat belt will be thrown forward and slam into the steering wheel, dashboard, front windshield or any object in the way of moving forward. Safe Operation Instructions Slowly pull the seat belt out of the retractor, then insert the latch plate into the buckle until a "click" fastening sound is heard, and then pull back the seat belt to confirm reliable locking.
Before using the seat belt, first adjust the front seat back and forth, the height* and the backrest tilt to the appropriate position. The upper part of the seat belt clings to the chest and across the shoulder, and the lower part of the seat belt clings to the hip. Do not act on the abdomen. Incorrect use of the seat belt will not only fail to provide protection, but may cause other serious injuries. 11 Do not twist the seat belt when using the seat belt. Twisting seat belt around the body increases the strain on the seat belt, and reduces the protective effect of the seat belt.
The seat belt should be adjusted as tight as possible without compromising comfort, which will provide better protection. Seat belt that is not fastened will greatly reduce the protective effect.