BAIC U5 PLUS Series Car User & Service Manual (EN)

1 (1)（1）

Foreword Thanks for choosing this vehicle. This User's Manual is applicable to U5 PLUS series models. Before using the vehicle for the first time, please be sure to read this User's Manual carefully, and get familiar with the vehicle structure, various functions, usage methods and relevant regulations of the company as soon as possible. Any use that fails to follow the instruction of the User’s Manual or The loss caused by retrofit without the approval of the company may lead to the loss of the user's right to claim. The content included in the User’s Manual will help you master the correct method of driving and maintenance of the vehicle, so that you can fully enjoy the driving pleasure.

This User’s Manual is intended to provide users with instructions and guidance on the use and maintenance of the vehicle. For the specific configuration of the vehicle, please check the purchase contract. If you have any questions about this vehicle and this User's Manual, please contact BAIC Motor Dealership. The pictures, data and descriptions contained in this User’s Manual conform to the product definition at the time of preparation. In view of the fact that the company will continue to modify and improve the vehicle, the pictures, data and instructions contained in User’s Manual are only for the introduction of the using method, not as the basis for ordering and acceptance.

We will continue to improve all models. Therefore, please understand that we reserve the right to change a certain part of the vehicle, equipment or technical specifications at any time. Data related to the scope of delivery, appearance, performance, dimensions, weight, fuel consumption, specifications and vehicle functions are correct as of the time of uploading. Some of the equipment/functions described in this manual may not be equipped in your vehicle (please consult BAIC Motor Dealership for details).

For all the information contained in this User's Manual, the Company solemnly declares that it is solely responsible for the revision, interpretation and explanation of this User‘s’ Manual, and reserves all rights and interests and the right to modify as stipulated in the Copyright Law. Without prior written consent of the Company, no part of this User's Manual shall be reproduced, copied or translated, and this publication shall not be copied or stored in the public retrieval system, nor shall it be transmitted in electronic or mechanical records or in any other form.

The equipment/functions marked with "*" are only applicable to some models or are optional parts or functions of some models. Please refer to the actual vehicle configuration. In the text of this User's Manual, "Short press" means that the press is held for less than 2 seconds and more than or equal to 0.1 seconds, and "Long press" means that the press is held for more than or equal to 2 seconds and less than 1 minute. The directions mentioned in this User’s Manual are vehicle driving directions. 1

Стр. 1

1 (1)

"DANGER", "WARN", "CAUTION" and some special symbols will appear frequently in this User’s Manual. Please pay special attention to them. Ignoring these warnings may cause personal injury or damage to your vehicle. Preface (continued) "Danger" indicates that failure to follow the instructions will likely result in serious personal injury or even death. "Warn" means that dangerous or unsafe operation will cause personal injury or vehicle damage. "Caution" gives helpful information. Sign means "Do not do this" or "Do not let this happen". Sign means "Please proceed with this operation" or "This operation is feasible". Symbols like this are used to sign an item in the figure.

A sign similar to this indicates the direction of operation or action. BAIC MOTOR Co., Ltd. October 2021 2

Стр. 2

1 (2)（1）

Notice to users Wearing a seat belt is a necessary guarantee for the safe driving of the driver and passenger in the vehicle. Adults shall wear seat belts correctly, and children shall correctly select and use child restraints and seat belts in accordance with the relevant requirements of this User's Manual. The liquid level of engine oil, cooling liquid, braking fluid, etc. When the engine is stalled, the vacuum booster does not work, the pedaling force of the brake pedal will increase significantly and the braking efficiency will be greatly decreased. Therefore, the vehicle is strictly forbidden from coasting when the engine is stalled. Braking:

Be sure to read the User’s Manual carefully before using the vehicle and observe the operation modes prompted in it during operation. Be sure to familiarize yourself with the operation and maintenance of the vehicle and drive it safely. We will not be responsible for any loss caused by improper use of the vehicle. Battery condition. Put the start/stop button in "RUN" mode and check the warning lamp. Engine operation: Do not run the engine in an airtight warehouse for a long time to prevent tail gas poisoning. Pre-driving inspection:

For a vehicle equipped with an automatic transmission, stop the vehicle before leaving the vehicle, put the gear shift lever in the "N" position, apply the parking brake, and then put the gear shift lever in the "P" position. For a vehicle equipped with a manual transmission, stop the vehicle before leaving the vehicle, then engage the shift handle in neutral and apply the parking brake. Be sure to carry out vehicle maintenance and service in accordance with the "Maintenance Schedule". Check whether the vehicle lamps work normally. In case of battery loss, electronic control unit of the engine and the starter will not work properly and the engine will not start.

Cleanliness of the windshields and rearview mirrors, and working conditions of wipers. In order to adapt to drivers of different statures, the driving position shall be adjusted as follows: The viewing position of the rear view mirror. Seat fore and aft adjustment, height adjustment*, backrest inclination adjustment. Tire pressure and tire wear. The tire condition directly affects the power performance, economy and ride comfort of the vehicle, and also affects the driving safety. Please use and maintain the wheels (including spare wheel) as required. The tire pressure should be checked when the tire is cold. Adjust the position of the steering wheel.

ABS can prevent wheel lock in case of braking on a slippery road or in emergency braking, which is conducive to stable driving direction, but you should still drive carefully. Position adjustment for the inside and outside rearview mirrors. 3

Стр. 3

1 (2)

Notice to users (continued) installation. This vehicle is equipped with a catalytic converter. The use of leaded gasoline is strictly prohibited, otherwise it may cause damage to the catalytic converter. dashboard. Please go to the BAIC Motor Dealership for maintenance and retrofit of the vehicle. BAIC Motor Dealerships have necessary tools, diagnostic equipment, repair information and qualified staff. About instrument cluster warning lamp:

If there are red warning lamps (such as brake, oil, cooling liquid temperature, etc.) on the instrument cluster during driving, stop the vehicle safely as soon as possible, check the vehicle according to the instructions in this User's Manual, and contact the BAIC Motor Dealership if necessary. Follow the following important driving rules to help ensure the safety of the driver and passengers throughout the journey! Tips on safety: If there is a yellow warning lamp on the instrument cluster during driving, it shall check the vehicle according to the instructions in this User's Manual, and contact the BAIC Motor Dealership for inspection if necessary.

Follow the traffic rules strictly and drive safely. Do not drive a vehicle after drinking or taking drugs. Observe the speed limit sign and do not overspeed. Do not allow water to enter the dashboard when applying film inside the front windshield. Do not put wet umbrellas, water cups filled with liquid on the dashboard during daily use of the vehicle, otherwise the water entering the dashboard may cause damage to the electrical components installed on the Electrical accessories: Any installation of electrical accessories must be wired in accordance with the specified power connection position and wiring method, please go to BAIC Motor Dealership for 4

Стр. 4