Control functions G a digital speedometer (which shows the riding speed) G a tachometer (which shows engine speed) G an odometer (which shows the total dis- tance traveled) G two tripmeters (which show the distance traveled since they were last set to zero) G a barometer (which shows the ambient barometric pressure) G a clock G warning indicators (which show self-diag- nosis, coolant temperature, fuel level, and oil level warnings) 1. Tachometer 2. Low coolant temperature indicator light “ 3. Warning light “ 4.
Meter display G indicator lights (which show high beam and low coolant temperature conditions) G a warning light (which shows warnings to- gether with the warning indicators) The grip warmer level or the rear shock ab- sorber compression damping level is initially displayed for 5 seconds according to the se- lected mode, then the display switches to the fuel meter. Odometer, tripmeter, and barometer modes Pushing the “SELECT” button switches the display between the odometer mode “ODO”, tripmeter modes “TRIP A” and “TRIP B”, and barometer mode “BARO”.
G a fuel meter (which shows the fuel remain- ing in the fuel tank) G a grip/thumb warmer level indicator (which shows the grip warmer level or the thumb warmer level) G a display brightness control function G a rear shock absorber compression damp- ing level indicator (which shows the com- pression damping force level of the electronically controlled rear shock absorb- er) After the engine is started, the tachometer makes one sweep, and the low coolant tem- perature indicator light, the warning light, and all segments of the meter display turn on and off once. 1. “SELECT” button To reset a tripmeter, push the “RESET” button for at least 1 second while the tripmeter is dis- played. 10