Control functions TIP If the main switch is turned to the off position or the engine is started before completing the procedure, the setting is not applied. The snowmobile can be operated normally af- ter the indicator light goes off. TIP Drive the snowmobile at low speeds when the low coolant temperature indicator light is on. If the engine speed is too high, maximum en- gine speed is reduced to protect the engine. ESU10410 High beam indicator light “ The high beam indicator light comes on when the high beams of the headlights are switched on.
(See page 16 for headlight beam switch operation.) ESU10442 Fuel meter, grip warmer level indicator, rear shock absorber compression damping level in- dicator, and thumb warmer lev- el indicator The fuel meter, grip warmer level indicator, rear shock absorber compression damping level indicator, and thumb warmer level indi- cator have eight segments which show the amount of fuel remaining in the fuel tank, the grip warmer level or the thumb warmer level, and the compression damping force level of the electronically controlled rear shock ab- sorber respectively. 1.
High beam indicator light “ ESU10472 Low coolant temperature indi- cator light “ The low coolant temperature indicator light comes on when the coolant temperature is low and informs the rider that the snowmobile should be warmed up. After the engine is started, warm it up until the indicator light goes off. 1. Fuel meter, grip warmer level indicator, rear shock absorber compression damping level indicator, and thumb warmer level indicator Fuel meter The display segments of the fuel meter disap- pear towards “E” (Empty) as the fuel level de- creases. When only one segment is left near “E”, the fuel level warning indicator and the warning light come on. 1.
Low coolant temperature indicator light “ 12