Control functions 2. Loosen the locknut. 1. Locknut 2. Control rod adjuster 3. To increase weight transfer, turn the ad- juster in direction (a), and to decrease weight transfer, turn it in direction (b). WARNING! Never adjust the control rod beyond the range of the scale on the special wrench, otherwise the con- trol rod could be damaged, which could lead to an accident or injury. [EWS00181] 4. Tighten the locknut while holding the ad- juster in place. NOTICE: Make sure that the special wrench is positioned at a right angle to the control rod, and that it is tightly fitted on the locknut or the control rod adjuster. [ECS00322] Locknut tightening torque: 35 Nm (3.5 m·kgf, 25 ft·lbf) 26