Pre-operation checks ESU11071 Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition. Always follow the inspection and maintenance procedures and schedules described in the Owner’s Manual. EWS00191 Failure to inspect or maintain the vehicle properly increases the possibility of an acci- dent or equipment damage. Do not operate the vehicle if you find any problem. If a prob- lem cannot be corrected by the procedures provided in this manual, have the vehicle inspected by a Yamaha dealer. ESU11080 Pre-operation check list 27 WARNING ITEM CHECKS PAGE Fuel • Check fuel level. • Refuel if necessary. • Check fuel line for leakage.
21 Engine oil • Check oil level in engine. • If necessary, add recommended oil to specified level. • Check vehicle for oil leakage. 48 Coolant • Check coolant level. • Add if necessary. 52 V-belt • Check for wear and damage. • Replace if necessary. 53 Drive guard • Make sure that drive guard is tightened securely. • Check the drive guard mounts for damage. 20 Brake • Check operation. • If soft or spongy, have Yamaha dealer bleed hy- draulic system. • Check brake pads for wear. • Replace if necessary. • Check fluid level in master cylinder. • If necessary, add recommended brake fluid to specified level. • Check hydraulic system for leakage.
58 Air filter • Check that there is no snow under the air filter ele- ment. • If necessary, brush off the snow. 46 Tool kit and recommended equipment • Check for proper placement. 41 Shroud and covers • Make sure that the shroud and covers are securely fastened. 19 Skis and ski runners • Check for wear and damage. • If necessary, have Yamaha dealer replace skis or ski runners. 60