AT Commands User Manual : type of the alarm; this parameter is ignored Note: if the MS does not have the possibility to generate an alarm tone, only the text is displayed at alarm time. : string type value indicating the text to be displayed when alarm time is reached; maximum length . : integer type value indicating the maximum length of , currently set to 255. : string type value (maximum string length is 13) indicating day of week for the alarm in one of the following formats: " [, […]]" – Sets a recurrent alarm for one or more days in the week. The digits 1 to 7 corresponds to the days in the week, Monday (1), …, Sunday (7). Example:
The string "1,2,3,4,5" may be used to set an alarm for some weekdays. "0" – Sets a recurrent alarm for all days in the week and all following weeks. : integer type value indicating the maximum length of which is currently limited to 15 characters . : Integer type value indicating if the alarm is silent or not: − 1: the alarm will be silent and the only result from the alarm is the unsolicited result code +CALV. − 0: the alarm will not be silent. integer type value indicating the index of the alarm; the maximum number of alarms is 3. 16 5.11 Delete alarm +CALD Command syntax Description AT+CALD= AT+CALD=0 AT+CALD= This action command deletes an alarm in the MT. OK or CME ERROR:
AT+CALD=0 Test command +CALD: (0) i.e. list of s OK AT+CALD=? 5.12 Restricted SIM access +CRSM Command syntax Description AT+CRSM= , , , , , . AT+CRSM=176,28471,0,0,3 Note: read ACMmax AT+CRSM=176,28423,0,0,9 Note: read IMSI AT+CRSM=178,28473,0,4,3 Note: read ACM AT+CRSM=176,28481,0,0,5 Note: read PUKT This command allows an easy access to the SIM database. By using this command instead of Generic SIM Access +CSIM DTE application has easier but more limited access to the SIM database. Set command transmits to the MS the SIM and its required parameters. MS handles internally all SIM-MS interface locking and file selection routines.
As response to the command, MS sends the actual SIM information parameters and response data. MS error result code +CME ERROR may be returned when the command cannot be passed to the SIM, but failure in the execution of the command in the SIM is reported in and parameters. +CRSM: , [, ] OK or CME ERROR: Test command AT+CRSM=? OK