SAFETY ROPS (Roll Over Protective Structure) The Roll Over Protective Structure (ROPS) is attached to protect the cab in case of a machine rollover. d WARNING: Operating with damaged or improperly mounted ROPS could serious injury or death. Be sure to observe the following: - Whenever seated, fasten the seat belt. - Do not modify ROPS, such as drilling or welding. - Do not use ROPS deformed. - If any damage or loose bolts (1) are found, do not operate until repaired. - Never repair or modify ROPS without manufacturer’s approval and instructions. ROPS 1 Be sure the ROPS is: CAB -in place. -properly attached (no bolts loose or missing). -not damaged. -not modified.
Periodically check the ROPS bolts (1) to be sure they are in place and tight. 115Z7-ROPS S-40