OPERATOR'S STATION Coolant Temperature Gauge The engine coolant temperature is indicated with a needle. When the needle stays in the range (1) during operation, the coolant temperature is normal. If the engine coolant temperature becomes abnormally high, the service indicator will flash and the alarm buzzer will sound. Stop machine operation and run the engine at low idle to lower the coolant temperature. After the coolant temperature lowers, stop the engine for inspection. Visually inspect coolant level in reservoir. In case the needle does not move at all, error in the electrical system is suspected. Contact your nearest authorized dealer for machine inspection.
1 M4GB-01-028 Fuel Gauge The fuel level is indicated by the needle. Refuel before the needle reaches in the red range "E". When the needle reaches in the red range (E), the fuel level indicator lights. f NOTE: The fuel level indicator may light even if the indicator needle does not reach the red range (E), depending on the tilt angle of machine. Fuel Level Indicator MNEC-01-002 1-17