SECTION 1 Page 22 OPERATION LIFT ARM CONTROL LEVER This lever is useo to operate the lift arm 1 Raise 2 Hold: The lift arm is kept in the same position 3 Lower 4 Float The lift arm moves freely under external force * When the lift arm control lever is pulled further from 1 position, the lever is stopped in this position until lift arm reaches the preset position of kick-out, and the lever IS backed to hold position This lever operates the bucket.
1 Tilt BUCKET CONTROL LEVER 2 Hold The bucket is kept in the same position 3 Dump When the bucket control lever is pulled further from 1 position, the lever is stopped in this position until bucket reaches the preset position of positioner, and the lever is backed to hold position This is used to lock the lift arm and bucket control levers SAFETY LOCK WARNING! When parking or leaving the machine, or when performing main- tenance, always lower the bucket to the ground, put the work equipment levers in hold position and check that safety lock lever is locked.