INSTRUMENTS AND CONTROLS ISO PATTERN CONTROL SYSTEM 2 - TRAVEL AND STEERING CONTROL LEVER DANGER Before carrying out any manoeuvre with this lever, the operator must be seated in the work position with fastened safety belt; before every manoeuvre the operator must take all the precautions indicated in “3.6.5 HOW TO MOVE THE MACHINE”. Before moving, make sure that the parking brake is disengaged. When travelling on roads, make sure that all the safety devices have been engaged. Failure to comply with these rules may lead to serious accidents.
The travel control lever (2) is positioned on the operatorнs left and serves to control the forward and reverse movements and the steering of the machine, according to the movements indicated in the diagram. N - Neutral A - Forward gear B - Counterrotation to the right C - Reverse gear D - Counterrotation to the left 81 F A D N B C R RWA22410