. OPERATION EXPLANATION OF COMPONENTS CAUTION ITEMS CAUTION (1) (2) Maintenance caution lamp Battery charge circuit caution lamp (3) (4) Air cleaner clogging caution lamp Water separator caution lamp MAINTENANCE CAUTION LAMP When the time comes to change the oil or replace the filters, this lamp (1) flashes or lights up for approx. 30 seconds after the starting switch is turned ON. Flashing: Less than 30 hours remaining to replacement time Lighted up: Replacement time already passed After replacing the filters and changing the oil displayed on display panel B (multi-information), reset the replacement time. For details, see "METHOD OF USING OIL AND FILTER MAINTENANCE MODE (PAGE 3-29)".
The lamp will go out. 3 - 10 If these caution lamps flash, check and repair the appropriate loc These are items which need to be observed when the en gine is running. If any problem occurs, the item nee immediate repair is d isplayed. If there is any problem, the problem location on the caution lamp will