OPERATION 11. EXPLANATION OF COMPONENTS The following is an explanation of the devices needed for operating the machine. To carry out suitable operations correctly and safely, it is important to understand fully the methods of operating the equipment and the meanings of the displays. 11.1 METER, LAMPS 1. ENGINE WATER TEMPERATURE GAUGE This gauge indicates the engine coolant water temperature. When the pointer of the temperature gauge shows in the white range, the temperature is normal. When the pointer enters the red range, stop the machine immediately, and run the engine with no load at midrange speed until the coolant temperature drops to normal value.
NOTICE If the engine coolant temperature gauge enters the red range fre- quently, check and clean the radiator fins. 2. TORQUE CONVERTER OIL TEMPERATURE GAUGE This gauge indicates the torque converter oil temperature. When the pointer of the temperature gauge shows in the white range, the oil temperature is normal. When the pointer enters the red range, stop the machine immediately, and run the engine with no load at midrange speed until the oil temperature drops to normal value. 2-5