OPERATION 3. FUEL GAUGE This gauge indicates the amount of fuel in the fuel tank. E: Tank is EMPTY F: Tank is FUEL If the fuel gauge indicates E during operation, check and supply fuel. 4. SERVICE METER This meter shows the total operation hours of the machine. The service meter advances while the engine is running - even if the machine is not traveling. While the engine is running a green pilot lamp on the service meter flashes to shows the service meter advances. The services meter advances by 1 when the engine is operated for one hour, regardless of the engine speed. 5. SPEEDOMETER This meter indicates the travel speed of the machine. 6.
TURN SIGNAL PILOT LAMP When the turn signal lamp flashes, the pilot lamp also flashes. 7. HIGH BEAM PILOT LAMP This lamp lights up when head lamp is at high beam. 8. PREHEATING PILOT LAMP This informs the operator that the air intake heater is heated. This lamp lights up when the starting switch is turned to the ON position, and goes out when the preheating is completed. The time that it remains lit up differs according to the water temperature when the engine is started. 2-6