Preparation for Use Hydraulic system ~( CAUTION) • For your own safety and maximum service life of machine, make a walk-around inspection before mounting machine or starting engine. Check under and around for the following items: Check oil level in hydraulic tank . Check for leaks from hoses and cylinders. • Break in your machine during initiallOO hours of operation. • After starting a cold engine, be sure to warm it up. Bolts and nuts --- -~. >==;~~~:::L., I Do not rev up engine unless abso- lutely necessary. Check for loose or missing bolts, especially on blade, air cleaner and track parts. Oil compartments \\ \\~ Check oil levels in oil pan and other compartments. Also check for leaks.
I 502676 Fuel system After initialI00 hours of operation of a new or reconditioned machine: Check oil level in fuel tank. Check system for leaks. Change engine oil ...... . . . . . . . . . . . . . . . . . .. 50 Change engine oil filter . . . . . . . . . . . . . . . . . . . 50 Change main clutch case oil [DD] ............... 51 Cooling system Change bevel gear case and transmission case oil [DD] . . . . . . . . . . . . . . . . . . . . . . . . . .. 51 Check coolant level in radiator. Check for leaks. ChaIlge transmission case oil [DPS] .......... . .. 51 Electrical system Change transmission case oil filter [DPS] ....... " 52 Check electrolyte level in battery. Check for loose terminals.
Make sure gauges and lamps operate properly. Change hydraulic tank oil . . . . . . . . . . . . . . . . . .. 52 Change hydraulic tank oil filter element .......... 52 Check and adjust clutch brake [DD] ............. 57