Starting and Stopping the Engine Before starting Starting Engine cold ~ After starting Stopping 2"-~1 ... 3 Heat for 10 HEAfFFON seconds. ;t~START Hear for 20 seconds in cold weather. '3 Engine warm 1 ~ 500012 OFF ON 2 l:START 502677 • Before stopping engine, idle it for 5 minutes. 1. Perform daily inspec- • Idle engine for 5 min- utes, and- tion, and make sure all controls a:ce in NEU- TRAL. 1. Check water tempera- ture gauge, fuel gauge and warning lamps for indication. 1. Turn starter switch to OFF. 2. Turn ON battery switch. .. Heating time means the length of time necessary to hold starter switch in HEAT. &,,( CAUTION) 2. Turn OFF battery switch. 3.
Move accelerator lever to START position. A WARNING· 2. Check for abnormal ex- haust noise and color or vibration. Do not start engine from any position other than seat. • Do not heat engine for more than 20/ seconds. Do not tlҐn starter switch to START for more than 30 seconds at a time, or during operation. 3. Check for oil or water leaks. &,,( CAUTION) Engine will not start unless transmission control lever is in NEUTRAL [DPS]. If engine fails to start within 30 seconds, wait 2 minutes before crank-