2-9 Item Thread dia. (mm) and pitch (length) Torque value N.m kgf.m lbf.ft • STERN BRACKET 7/8-14 UNF self-locking nut 25 x 2.0 mm self-locking nut 10 mm self-locking nut 7/8-14 UNF M25 x 2.0 M10 x 1.25 34 34 34 3.5 3.5 3.5 25 25 25 • POWER TRIM/TILT ASSEMBLY Cylinder cap comp. Rod guide comp.
Manual valve Socket bolt A/B Power tilt motor assembly bolt Power tilt motor assembly code holder screw Oil tank bolt Oil tank cap M14 x 1.5 1/4-20 UNF M4 screw 162 78 3.5 8.5 5 1.4 5 2.5 16.5 8.0 0.35 0.85 0.5 0.14 0.5 0.25 119 58 2.5 6.1 3.6 1.0 3.6 1.8 • FRAME/ELECTRICAL Grease fitting Neutral switch nut Starter motor B terminal washer-nut Alternator B terminal washer-nut Alternator fuse box B terminal washer-nut Alternator fuse box bolt Fuse box bracket bolt PGM-FI main relay bolt ECM bracket bolt L./R.
engine under cover screw Starter motor bolt M6 x 1.0 M20 x 1.0 M8 x 1.25 M6 x 1.0 M6 x 1.0 M6 x 1.0 M6 x 1.0 M6 x 1.0 M6 x 1.0 M6 screw M10 x 1.25 3 2.5 11 8 8 5 5 5 5 4.5 44 0.3 0.25 1.1 0.8 0.8 0.5 0.5 0.5 0.5 0.45 4.5 2.2 1.8 8 5.8 5.8 3.6 3.6 3.6 3.6 3.3 33 • Use the standard torque values for the bolts, nuts and screws that are not listed in this table. STANDARD TORQUE VALUES Item Thread dia.
(mm) and pitch (length) Torque value N.m kgf.m lbf.ft Screw 5 mm 6 mm 4.2 9 0.42 0.9 3.0 6.5 Bolt and nut 5 mm 6 mm 8 mm 10 mm 12 mm 5.2 10 21.5 34 54 0.52 1.0 2.15 3.5 5.5 3.8 7 16 25 40 Flange bolt and nut 6 mm (SH bolt) 6 mm (CT bolt) 6 mm 8 mm 10 mm 9 12 12 26 39 0.9 1.2 1.2 2.7 4.0 6.5 9 9 20 29 • CT bolt: Self-tapping bolt • SH bolt: Small head bolt