y 2 - Section 20 OM2030 0-10 OM2030 OM2030 r at KING NEAR BATTERIES y Hazard Prevention tery electrolyte contains sulfuric acid and can quickly burn the skin and eat holes in clothing. If you spill acid o B w If p o B w f p n at it y oi yourself, immediately flush the area with tery acid can cause blindness if splashe h large quantities of water and see a doc ou accidentally drink acid, drink a large q son prevention center immediately. d t u water. into the eyes. If acid gets into the eyes, flush them immediately or at once. antity of water, milk, beaten eggs or vegetable oil. Call a doctor or ety glasses or goggles.
gas is very explosive, and is easily ignited with a small spark of e and turn the key switch to the OFF position. through accidental contact with metallic objects, such as tools, he positive (+) terminal and negative (-) terminal. • • • • • • • Sta • • • • • • ety glasses or goggles. gas is very explosive, and is easily ignited with a small spark of e and turn the key switch to the OFF position. through accidental contact with metallic objects, such as tools, he positive (+) terminal and negative (-) terminal. • • • • • • • Sta • • • • • • f r I t When working with batteries always wear safety glasses or goggles. Batteries generate hydrogen gas.
Hydrogen gas is very explosive, and is easily ignited with a small spark of lame. Before working with batteries, stop the engine and turn the key switch to the OFF position. Avoid short-circuiting the battery terminals through accidental contact with metallic objects, such as tools, across the terminals. When removing or installing, check which is the positive (+) terminal and negative (-) terminal. Tighten battery caps securely. Tighten the battery terminals securely. Loose terminals can generate sparks and lead to an explosion. ting With Booster Cables Always wear safety glasses or goggles when starting the machine with booster cables.
When starting from another machine, do not allow the two machines to touch. Be sure to connect the positive (+) cable first when installing booster cables. Disconnect the ground or negative (-) cable first during removal. f any tool touches between the positive (+) terminal and the chassis, it will cause sparks. Always use caution when using tools near the battery. Connect the batteries in parallel: positive to positive and negative to negative. When connecting the ground cable to the frame of the machine to be started, connect it as far as possible from he battery. hen working with batteries always wear s atteries generate hydrogen gas. Hydroge ame.
efore working with batteries, stop the engi oid short-circuiting the battery terminals cross the terminals. hen removing or installing, check which is ghten battery caps securely. ghten the battery terminals securely. Loos en working with batteries always wear s teries generate hydrogen gas. Hydroge me. ore working with batteries, stop the engi id short-circuiting the battery terminals oss the terminals. en removing or installing, check which is hten battery caps securely. hten the battery terminals securely. Loos af n n t ety glasses or goggles. gas is very explosive, and is easily ignited with a small spark of e and turn the key switch to the OFF position.
through accidental contact with metallic objects, such as tools, he positive (+) terminal and negative (-) terminal. urely. nals securely. Loos rely. als securely. Loos e terminals can generate sparks and lead to an explosion. e e e os o e e p u s s or goggles when starting the machine with booster cables. r machine, do not allow the two machines to touch. itive (+) cable first when installing booster cables. Disconnect the ground or negative val. n the positive (+) terminal and the chassis, it will cause sparks. Always use caution battery. arallel: positive to positive and negative to negative.
nd cable to the frame of the machine to be started, connect it as far as possible from n starting the machine with booster cables. t allow the two machines to touch. t when installing booster cables. Disconnect the ground or negative terminal and the chassis, it will cause sparks. Always use caution positive and negative to negative. ame of the machine to be started, connect it as far as possible from starting the machine with booster cables. allow the two machines to touch. when installing booster cables. Disconnect the ground or negative erminal and the chassis, it will cause sparks. Always use caution ositive and negative to negative.
me of the machine to be started, connect it as far as possible from