Safety - Section 20 Page 20-13 at c n e. o er L essa d ra the sen e r d p t vel y to add coolant to the radiator, stop the engine, and allow the iator to cool down before adding the coolant. ressure release button on the cap to vent cooling system he cap to relieve any remaining pressure during removal. g fuel, oil, coolant, or battery electrolyte, always use ti-explosion specifications. If such lighting equipment is is danger or explosion. g fuel, oil, coolant, or battery electrolyte, always use ti-explosion specifications. If such lighting equipment is is danger or explosion.
Use Of Ligh • When c lighting not used t h w , ing ecking fuel, oil, coolant, or battery electrolyte, always use ith anti-explosion specifications. If such lighting equipment is there is danger or explosion. ng fuel, oil, coolant, or battery electrolyte, always use nti-explosion specifications. If such lighting equipment is e is danger or explosion. g fuel, oil, coolant, or battery electrolyte, always use ti-explosion specifications. If such lighting equipment is is danger or explosion. Precautions With The Battery • When repairing the electrical system or when performing electrical welding, remove the negative (-) terminal of the battery to stop the flow of current.
Handling High Pressure Hoses • Do not bend high-pressure hoses or hit them with hard objects. Do not use any bent or cra hoses. They may burst during use. • Always repair any loose or broken hoses. If fuel or oil leaks, it may result in a fire. Precautions With High Pressure Oil • Do not forget that work equipment circuits are always under pressure. • Do not add oil, drain oil, or perform maintenance or inspections before completely re pressure. • Small, high pressure pin-hole leaks are extremely dangerous. The jet of high-pressure oi and eyes. Always wear safety glasses and thick gloves. Use a piece of cardboard or a sh for oil leakage.
• If you are hit by a jet of high-pressure oil, consult a doctor immediately for medical attentio ck le l ee n. ed piping, tube asing the inte can pierce the t of wood to c s r s he Handling High Pressure Hoses • Do not bend high-pressure hoses or hit them with h hoses. They may burst during use. • Always repair any loose or broken hoses. If fuel or Precautions With High Pressure Oil • Do not forget that work equipment circuits are alwa • Do not add oil, drain oil, or perform maintenanc pressure. • Small, high pressure pin-hole leaks are extremely and eyes. Always wear safety glasses and thick gl for oil leakage.
• If you are hit by a jet of high-pressure oil, consult a Handling High Pressure Hoses • Do not bend high-pressure hoses or hit them with hoses. They may burst during use. • Always repair any loose or broken hoses. If fuel o Precautions With High Pressure Oil • Do not forget that work equipment circuits are alw • Do not add oil, drain oil, or perform maintena pressure. • Small, high pressure pin-hole leaks are extremel and eyes. Always wear safety glasses and thick for oil leakage. • If you are hit by a jet of high-pressure oil, consult