3.1.36. Flywheel housing z Remove the flywheel housing fixing bolts and disassemble the flywheel Gasket housing. Fixing bolt z Disassemble the oil seal of flywheel housing. Oil seal 3.1.37. Bearing cap z Remove the bearing cap assembling bolts by the step in the reverse order of assembling, and disassemble the bearing cap. (Remove by the same way as the cylinder head bolts' removal.) z Disassembled bearing caps are kept laid in order. 3.1.38. Crank shaft z Assemble the bolts on the both side of crankshaft temporarily. z Connect the rope to the bolts and lift the crankshaft by means of crane being careful not to give any damage on it.
z In order for the disassembled crankshaft to be prevented from bends or damage, put it on the special lathe and store. z Disassemble the metal bearings in turn and store them. DL06 Diesel Engine Disassembly and Reassembly of Major Components 68