NOTES : Do not mingle with the metal bearings and bearing caps randomly. To prevent mixing, temporarily assemble the metal bearings to the corresponding bearing caps in turn . 3.1.39. Cam shaft & tappet z In order for camshaft not to be damaged, disassemble turning it. z In order for the disassembled camshaft to be prevented from bends or damage, put it on the special lathe and store. z Pull out the tappet. z Check for damage, scratch, wearing state and if abnormal, tear down. 3.1.40. Oil spray nozzle z Remove the valve screws of oil spray nozzle and disassemble it. DL06 Diesel Engine Disassembly and Reassembly of Major Components 69