3.3.29. Vibration damper and pulley Install the vibration damper on the crankshaft pulley. Install the crankshaft pulley assembly on the crankshaft, then tighten the bolts and thrust washers. 3.3.30. Water pump Mount a new O-ring. Install the water pump drive pinion over the air compressor spline. Connect water pipes and by-pass pipe to the water pump. Connect a water pipe to the expan- sion tank. EAMD112I 3.3.31. Exhaust manifold Install the exhaust manifold gasket over the stud bolts by aligning the gasket with the exhaust port on the cylinder head so that the face and back of the gasket can be positioned correctly. Semi-assemble the exhaust mani- fold and install the heat resisting plate.
3.3.32. Turbocharger Fit a new gasket over the stud bolts of the exhaust manifold before tight- ening those turbocharger fixing bolts. Install the oil supply pipe and return pipe. EQM3012S - 94 - REASSEMBLY Torque 13.4 kg.m