Group 43 MID 130 Transmission Control Unit, Fault Codes MID 130 PPID 54 ECM +5V Output MID 130 PPID 55 ECM, Temperature MID 130 PPID 140 Inclination Angle 26 Type of fault: FMI Description: Fault Condition: Possible Symptoms: Possible Cause: FMI 0 • Data valid but above normal operational range • Voltage is above normal range • Yellow lamp is sent • Slow clutch performance • Uneven shifting at start and at slow speed • Slow gear changes • N/A FMI 1 • Data valid but below operational range • Voltage is below normal range • Yellow lamp is sent • Slow clutch performance • Uneven shifting at start and at slow speed • Slow gear changes • N/A Type of fault: FMI Description: Fault Condition:
Possible Symptoms: Possible Cause: FMI 0 • Data valid but above normal operational range • Temperature is above 125°C (257°F) • Yellow lamp is sent • N/A Type of fault: FMI Description: Fault Condition: Possible Symptoms: Possible Cause: FMI 2 • Data erratic, intermittent, or incorrect • The sensor signal is above or below normal range • The vehicle has been standing still for a specific time • Yellow lamp is sent • The start gear may be wrong • Gear selection performance might be reduced • Downhill and uphill gear change performance may be reduced • N/A