Safety | General safety precautions 2 2.6.1 Symbols on the product The following symbols are used to identify the product: Symbol Meaning Observe the safety precautions regarding electricity and power connection before you connect the product. Functional ground connection as per IEC/EN 60204-1. Observe the information on installation. Product seal. Breaking or removing the product seal will result in forfeiture of warranty and guarantee. 2.6.2 Electrical safety precautions WARNING Hazard of contact with live parts when opening the wall adapter power supply. This may result in electric shock, burns or death.
Never open the housing Only the manufacturer is permitted to access the inside of the product WARNING Hazard of dangerous amount of electricity passing through the human body upon direct or indirect contact with live electrical parts. This may result in electric shock, burns or death. Work on the electrical system and live electrical components is to be performed only by trained specialists For power connection and all interface connections, use only cables and connectors that comply with applicable standards Have the manufacturer exchange defective electrical components immediately Regularly inspect all connected cables and all connections on the product.
Defects, such as loose connections or scorched cables, must be removed immediately NOTICE Damage to internal parts of the product! If you open the product, the warranty and the guarantee will become void. Never open the housing Only the product manufacturer is permitted to access the inside of the product 20 HEIDENHAIN | PWT 100, PWT 101 | Operating Instructions | 07/2024