1. Outline 1-1. Product Application A. Application B. System Components Parts Number 1-2. Outline This Service Manual describes the new common rail system installed on the E13C engine of large Hino trucks. The big- gest difference compared with conventional common rail systems is that it uses an injector with a QR code. The basic construction and operation of the system is about the same as for systems installed on the P11C engine, so this Service Manual will only give a general outline of the E13C system and describe its unique features.
For details on the common rail system, refer to Service Bulletin ECD 01-08 "New Common Rail System (ECD-U2) for HINO" published in December 2001, and Service Manual "Common Rail System for HINO J05D/J08E Type Engine" published in October 2003.
-1- Manufacturer Engine Model Destination HINO E13C General countries Parts Name DENSO Parts Number Manufacturer Parts Number Remarks Supply pump 094000-0421 22730-1231A HP0 type Injector 095000-5223 23910-1242A With QR code Rail 095440-0460 22760-1150A Engine ECU 102758-3001 89560-6530A With EDU inside Accelerator position sensor 198300-8160 89441-6950A Crankshaft position sensor 029600-0570 89411-1280A Cylinder recognition sensor 949979-1300 — Included in the supply pump Fuel temperature sensor 179730-0090 22790-1010A Coolant temperature sensor 071560-0110 83420-1250A Intake air temperature sensor 072800-0350 89441-6230A Intake air pressure sensor 079800-5890 89390-1080A