9 [5] ASSEMBLY PROCEDURE ( 3) Installation of cab assembly 4) Tuck up the bellows at the lower part of the steering post and loosen the 4 bolts. 5) Set the steering tilt lever free and turn down the steering post fully toward to operator's seat. 6) Installation of seal • Necessary parts Part No. Part name Q'ty 426-56-21330 Seal 1 Seal may be stuck 1. Stick the seal to the underside of the joint. Apply adhesive to joint, however. cab assembly. (Use adhesive CEMEDINE 366E or 2. When sticking the seal, press it equivalent.) against the inside face of the cab assembly. Precautions Special tools Necessary devices Name Q'ty Name Q'ty Other remarks ( 3) Part No. Part name Q'ty 426-56-21330 Seal 1