12. OPERATION 2. Then return the key of starting switch a to the OFF posi- tion. OFF 3. Pull fuel control lever 0 to LOW IDLING and HIGH IDLING. the center position between 4. Turn the key of starting switch 0 to the ON position. OFF 5. Keep quick start switch 0 depressed and wait for 2 - 3 seconds. 6. Turn the key of starting switch 0 to the START position to crank the engine. OFF 7. While cranking the engine, release quick start switch 0 and start the engine. REMARK When starting, and cranking the starting motor, the caution monitor lamp may flash, but if it goes out after the engine start, there is no abnormality. 2-46