12. OPERATION 8. When the engine starts, return the key of starting switch 0 to the ON position. (Release the key and it will return automatically.) 9. When the engine rotation stabilizes, move to low idling, and then carry out the warming-up operation. REMARK l If the engine speed does not increase, repeat the pushing operation of the quick start switch 2 - 3 times while cranking. l After starting, if the engine speed drops and the engine is about to stop, operate the quick start switch to spray ether. When doing this, adjust the number of times of operating the spray so that the engine does not rise too far. l If the engine does not start with the above operation, wait for approx.
2 minutes and repeat Steps 4 - 7. 2-47