9. EXPLANATION OF COMPONENTS OPERATION Pitch operation 1. Push the blade/ripper selector switch towards the blade. 2. hen left control lever (2) is operated, the blade is pitched. REMARK If the pitch and tilt operations (both in dual mode and sin- gle mode) are operated at the same time, priority is given to the pitch operation. 9.1.3 OPERATION METHOD FOR PIN-PULLER USING RADIO CONTROL 1. Set the engine starting switch to the PARKING position to apply the parking brake. 2. Operate the blade/ripper selector switch to the ripper position. 3. When the blade FLOAT switch is kept pressed, the pin- puller is pulled out.
REMARK If the parking brake is released when the pin-puller is pulled out, the pin-puller will return to the normal position. The ripper can be operated even when the parking brake is applied. 3-8