SAFETY Leaving Operator’s Compartment These procedures must be followed when exiting the operator’s cab. 1. Park the machine in a level area. 2. Lower the work equipment completely to the ground. 3. Set work equipment lock lever (1) to LOCK position (L). 4. Set parking brake switch (2) to the ON position (A). 5. Turn the engine OFF. 6. Remove the ignition key and keep the key with you. 7. Use the key to lock and secure all the equipment locks. This will prevent unauthorized personnel from tampering with your machine. You are responsible for securing your machine. Remark Never leave your machine running and unattended, even for a moment. Remark Work equipment posture:
See “Parking the Machine” on page 2-152.. Lock: See “Locking the Machine” on page 2-155.. 1-18 WA380-6