Operating & maintenance manual 2 Safety instructions 2.1 General use of the compaction roller 14 WARNING Risk of accidents! Before starting the compaction roller, the driver needs to be informed of the specific safety requirements for work in the danger zone and is obliged to check whether the necessary precautions have been taken. CAUTION Unknown environmental and working conditions!! Prior to starting your work, make sure that the weather, the road and the condition of the ground allow for a safe operation of the compaction roller. Watch out for potential sources of danger and act accordingly WARNING Before transporting the compaction roller!
x The compaction roller may be loaded and unloaded by experienced and adequately skilled & qualified individuals only. x Make sure you load and unload the compaction roller on even and solid ground. x Do not overload the transport vehicle. x Clean the tires of the compaction roller in order to remove snow, ice and dirt. CAUTION Risks resulting from a faulty condition of the compaction roller! x Carry out the required checks and maintenance measures, see chapters on maintenance. x Repair damage immediately or contact the Hyundai service team. x Do not resume your work before the damage is repaired. WARNING Danger of falling while getting on/off the compaction roller!
x Always face the cab, use handles, stairs and steps! x Always keep stairs, steps and handles clean and dry! x Do not use any control elements as handles! WARNING Risk of accidents caused by restricted visibility! x Stop the vehicle or reduce speed until visibility improves. x Be sure to keep the windows clean, free of ice, steam, frost. x Do not hang up any clothes or other objects which might restrict your view. NOTICE Ensure the operational readiness of the compaction roller! Prior to starting your work, check the fill levels and add the required consumables, see maintenance instructions. Carry out the work required for Inspection certificate A, see chapters on maintenance.