Operating & maintenance manual 4 Transporting the compaction roller 4.1 Securing and loading the compaction roller before transporting it 4.1.1 Loading the compaction roller onto a flat bed truck x Check the position X of the ramps of the flat bed truck before driving the compaction roller onto it. x The ramps need to be positioned in a way that ensures that the tires roll on the center of the ramps. x Start the Diesel engine. x Release the parking brake. The symbol for the parking brake on the dashboard is deactivated. x Drive the compaction roller onto the flat bed truck in reverse gear, with the rear of the roller ahead. x Activate the parking brake and stop the diesel engine.
The activation of the parking brake is indicated by the corresponding symbol on the dashboard. x Remove the ignition key and lock the doors after getting off the vehicle. Fig. 5 Driving onto a flat bed truck 21 WARNING Secure attachments and objects in the cab before carrying out the transport! x Remove any objects attached to the exterior of the vehicle and transport them separately. x Remove or fasten objects that are kept in the vehicle. WARNING Precautionary measures for transporting the compaction roller! x The compaction roller may be loaded and unloaded by adequately trained persons only. x It may only be loaded and unloaded on level, solid ground.
x Do not overload the transport vehicle. x Observe the total weight of the compaction roller, see Technical specifications. X