Operating & maintenance manual 6 Before starting the compaction roller 6.1 Prior to the initial start 6.2 Checking the compaction roller: Visual inspection Prior to starting the compaction roller, perform a visual inspection to get a picture of the current condition of the compaction roller. Clean the exterior mirrors Check fill levels Check: x the accumulation of dirt and clean the compaction roller by means of a high pressure washer, if necessary. x the drum and the condition of the contact scrapers with flexible vulcollan bar. x the condition and the air pressure of the tires (adjust the tire pressure, if necessary:
1.6 bars (23.2 psi) for standard tires with water filling; for special tires, consult the tire manufacturer. x the following fill levels: Clean windows Check pressure x Fuel (Diesel) x Hydraulic oil x Engine oil x AdBlue ® x Water level for the windshield washer system Fig. 1 Visual inspection x whether the windows of the cab are dirty - clean the exterior and interior window panes, if required x whether the exterior mirrors are dirty - clean them, if required. 28 SAFETY Obligation to inform yourself! x Inform yourself of all issues related to operating the compaction roller. x Read the safety instructions before starting the compaction roller.
In addition to this, be sure to observe the national and local laws and directives concerning the operation of earth-moving construction machines. In case of doubt, contact your local Hyundai dealer. INSTRUCTIONS