3 i5601E Digital Display Alarms/Diagnostics When an Alarm Block appears on an operating screen, pressing any key acknowledges the alarm and immediately switches the display to the Alarms screen. The i5601E continues to beep until all alarm conditions (engine faults) have cleared. Unacknowledged alarms are shown as flashing boxes. Press any key to acknowledge alarm boxes that may still be flashing, and they will then change to a steady highlighted state. Alarm blocks remain highlighted as long as the alarm condition (engine fault) remains and will automatically reset to an un-highlighted state after the alarm condition has passed. Note:
You must have entered the password under “Factory Settings” for the “Clear” button to function. Note: For detailed information on engine codes, see appropriate engine manual. © 2011 Yanmar Marine International • Rev. 2.0 Yanmar Electronic Control Systems Technical Manual 3:17