3 i5601E Digital Display Monitor Settings i5601E monitor settings Introduction The “Monitor Settings” menu allows setting of parameters that are specific to the display unit. Some settings such as “Language” and “Lighting” will be communicated via the CAN Bus to the other like display Units. “Down” Arrow moves menu selection down. “Up” Arrow moves menu selection up. “Right” Arrow acts on current menu item. “Exit” moves back to previous menu. Menus The “Menus” Selection allow a choice of how the keys will function in the normal display mode. “Down” Arrow moves menu selection down. “Up” Arrow moves menu selection up. “Right” Arrow acts on current menu item. “Exit” moves back to previous menu.
The default mode for the i5601E is “Hot Keys Locked.” That allows use of the keys for all major engine data. In this mode the keys match the quick reference card that comes with the system. System reset (select “Default Monitor”) restores default screens and hot keys locked. © 2011 Yanmar Marine International • Rev.
2.0 Yanmar Electronic Control Systems Technical Manual 3:19 Display Description Function POP UP MENUS/HOT KEYS (LOCK) Sets key functionality Units Menu Engine units Language Menu Select one of 8 languages Tach Range 0-3000 Select Tachometer Scale (Range) SPEED Adjust speed Depth Offset Set Hull offset Default Monitor Set i5601E unit back to default settings Beeper ON Turns audible sound on and off About Information about unit Display Choice Function “POP-UP” Full menus displayed and all key choices. “HOT KEYS” Preprogrammed hot key choices only. “HOT KEYS LOCKED” Same as above, but right arrow choice on some screens is removed.