3 i5601E Digital Display Monitor Settings Tach Range 0-3000 Pushing the “Right Arrow” button causes the display value to sequence through the settings. Display Choice 0-3000 0-4000 Note: The i5601E will default to the correct value for various engines on initial startup. 0-5000 0-6000 0-7000 Speed The SPEED option changes the speed transducer reading by the percentage set here. It is possible to calibrate the speed against a GPS. Use the + (plus) and “–” (minus) keys to adjust the speed to match the GPS-based “SOG” (Speed Over Ground). This needs to be done where no current is present. © 2011 Yanmar Marine International • Rev.
2.0 Yanmar Electronic Control Systems Technical Manual 3:21 Display Choice Function SPEED Variable % adjustment factor. 100% = no adjustment. Incrementally adjust by +/-1% SOG Variable % adjustment factor. 100% = no adjustment. Incrementally adjust by +/-1%