1. COMMON MODEL INFORMATION TRIM TAB ADJUSTMENT Dual Motors BFZOONBF225A shown. STANDARD ROTATION After engine break-in, run boat at full speed and check to see if boat pulls to the left or right, or an uneven effort is required to turn left or right. Adjust trim tab as required to ensure good, straight running characteristics. BF2OOAl225A shown. L I \ 10 x 32 mm TRIM TAB LOCK BOLT 1. Remove the trim tab lock bolt and trim tab from the standard rotation outboard motor. 2. Replace the trim tab with the gear case cover and tighten the bolt. TORQUE: 34 N*m (25 ft-lb) If boat pulls to the left: Loosen trim tab lock bolt and move trim tab trailing edge to the left. If boat pulls to the right:
Loosen trim tab lock bolt and move trim tab trailing edge to the right. Date of Issue: June 2003 0 2001-2003 American Honda Motor Co., Inc. 1-44