EBS01030 CHECKING THE BULBS AND BULB SOCKETS Check each bulb and bulb socket for damage or wear, proper connections, and also for con- tinuity between the terminals. Damage/wear Repair or replace the bulb, bulb socket or both. Improperly connected Properly connect. No continuity Repair or replace the bulb, bulb socket or both. TYPES OF BULBS The bulbs used on this vehicle are shown in the illustration on the left. Bulbs a and b are used for the headlights and usually use a bulb holder that must be detached before removing the bulb. The majority of these types of bulbs can be removed from their respective socket by turning them counterclockwise.
Bulbs c is used for turn signal and tail/ brake lights and can be removed from the socket by pushing and turning the bulb counterclockwise. Bulbs d and e are used for meter and indi- cator lights and can be removed from their respective socket by carefully pulling them out. 9 - 7 CHECKING THE BULBS AND BULB SOCKETS ELEC – + ELEC – +