CHECKING THE CONDITION OF THE BULBS The following procedure applies to all of the bulbs. 1. Remove: bulb WARNING _ Since the headlight bulb gets extremely hot, keep flammable products and your hands away from the bulb until it has cooled down. _ Be sure to hold the socket firmly when removing the bulb. Never pull the lead, otherwise it may be pulled out of the ter- minal in the coupler. Avoid touching the glass part of the head- light bulb to keep it free from oil, other- wise the transparency of the glass, the life of the bulb, and the luminous flux will be adversely affected. If the headlight bulb gets soiled, thoroughly clean it with a cloth moistened with alcohol or lacquer thinner.
CAUTION: 2. Check: bulb (for continuity) (with the pocket tester) No continuity Replace. Pocket tester 90890-03112 Analog pocket tester YU-03112-C NOTE: _ Before checking for continuity, set the pocket tester to “0” and to the “ Ω Ч 1” range. 9 - 8 CHECKING THE BULBS AND BULB SOCKETS ELEC – + ELEC – +